STRAW FOAM

Quick Cure Polyurethane Foam Sealant

A fast and easy, high-yield means to seal cracks and gaps. Patented all-direction dispensing easily maneuvers tight spots. Reusable dispensing means you can restart the can later.

All Direction Dispensing™, use at any angle
24 oz. can sizes (12 pack)
Reuseable straw dispensing system
Straw and adapter included. No gun needed.
Yields 1800 linear feet of ¼” diameter bead (24 oz. can, ASTM C-1536)
Tack-free in 30 minutes, fully cured in 4 hours (40% R.H.)
UL Classified, flame spread 10, smoke developed 15
No CFCs, no HCFCs

Straw Foam Use Guidelines

ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview, meant to accompany the reference photos. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

Straw Foam

Ensure surface accepting foam is clean and dry.

Attach straw to trigger adaptor.

Screw adaptor onto can valve.

Shake vigorously for 30 seconds.

Press trigger to test foam on scrap material first.

Fill gaps and cracks as needed, filling about 1/3 full to allow for foam expansion.

Foam can be trimmed, painted, sanded or plastered after curing completely.

Storage

Bend straw backwards, away from trigger and push end of

straw onto top of trigger adaptor.

Store as needed (up to 15 days).

Restart by pulling straw tip off top of adaptor. Test on scrap material first.