AUSTRALIAN
URETHANE SYSTEMS
URETHANE SYSTEMS
ASSOCIATED PRODUCTS
POLYURETHANE
CLEANING SOLVENTS
AUS supplies
a range of solvents for removing and cleaning polyurethane residues from contaminated
metal gun parts and machinery components.
AUSCA Boil-up
cleaning solvent for metal parts
| • | For use with metal parts only for softening and removing cured polyurethane products. |
DPM Gun flushing
solvent
| • | Flushing / Cleaning solvent for cleaning polyurethane processing equipment. |
| • | For flushing liquid polyurethane (uncured) components in lines, pumps, and for gun flushing. |
| • | Recommended for flushing of GusmerŪ guns and equipment. |
AUSDOP Plasticiser
solvent line and equipment fluid
| • | For use in ISO pump cup seals and as plasticiser solvent. |
| • | For use as a PU equipment flushing solvent or after DPM gun solvent has been flushed through equipment / lines. |
| • | Introduce into lines / pumps / equipment to prevent possible residual moisture contamination. |
| • | Use in ISO cup seals and ISO pump "wet seal" circuits. |
AUSFLUSH Cleaning
solvent for use on/ with metal parts
| • | Formulated cleaning solvent that will remove both cured and uncured polyurethane residues from metal parts. |
| • | For use on metal parts only. |
PREFLUSH Flushing
solvent for GRACO-GUSMERŪ machine line flushing
| • | A specially formulated product for flushing lines on GRACO-GUSMERŪ machines. |
| • | Suitable for use with ISO side polyurea component. |
Australian Urethane Systems Pty. Ltd. all rights reserved
 |
 |
 |
 |
 |
 |
 |
 |
 |