AUSTRALIAN URETHANE SYSTEMS
COATING PRODUCTS
POLYASPARTIC
Polyaspartic coatings
The uses of polyaspartic esters for finish coats represent an exciting new technology called polyaspartics. The new Polyaspartic topcoats are designed to provide unequalled color protection in an unprecedented number of environments. These new waterproofing products and systems, break new grounds in terms of durability and range of use. They are developed for real world challenges where high productivity applications are important, with formulas that withstand the hottest and coldest temperatures on the planet.
Technical Highlights
| • | Fast cure/high productivity: 5-120 min. hard dry. |
| • | High film build (up to 15 mils.) |
| • | Bubble-free film surface |
| • | Formulation flexibility |
| • | Pot life: 5 min. - 2 hours |
| • | Controlled cure |
| • | Non-yellowing/gloss retention |
| • | Low waste |
| • | High Solids: 70% to near 100% Solids |
Staingard™ 6000
Polycoat-Staingard 6000 is a 100% solids by volume, aliphatic polyaspartic coating, two-component, liquid applied, environmentally friendy surface topcoat for waterproofing membrane systems, with a citrus odor. Polycoat-Staingard 6000 is quick curing and specifically formulated to be installed
in thin film applications.
in thin film applications.
FEATURES
TYPICAL USES
| • | Quick Cure, Color Stable |
| • | High Tensile Strength, High Gloss |
| • | Abrasion Resistant |
| • | Topcoat over aromatic polyurea, polyurethane and epoxy applications raging from 35°F to 130°F, service temperature 0°F to 200°F |
| • | Very Durable Excellent Weatherability |
| • | Seamless Waterproofing Membrane |
| • | UV Resistant For Superior Gloss Retention. Meet California AQMD Requirements |
| • | Concrete, Steel |
| • | Plywood, Plastic |
| • | Cold Storage Areas, Food Processing Areas |
| • | Industrial Warehouses Pulp and Paper Mills |
| • | Chemical Plants, Fertilizer Plants |
| • | Off-Shore Oil Platforms, Pipeline Barges |
Staingard™ 6072
Staingard 6072 is a 72% solids by volume, aliphatic polyaspartic coating, two-component, liquid applied, environmentally friendly surface topcoat for waterproofing membrane systems, with a citrus odor. Polycoat-Staingard 6072 is quick curing and specifically formulated to be installed in thin film applications.
TYPICAL USES
FEATURES
| • | Quick Cure, Color Stable |
| • | High Tensile Strength ..High Gloss |
| • | Abrasion Resistant |
| • | Topcoat over aromatic polyurea, polyurethane and epoxy applications raging from 35°F to 130°F, service temperature0°F to 200°F |
| • | Very Durable. Excellent Weatherability |
| • | Seamless Waterproofing Membrane |
| • | UV Resistant For Superior Gloss Retention. Meet California AQMD Requirements |
| • | Concrete. Steel |
| • | Plywood . Plastic |
| • | Plastic Cold Storage Areas. Food Processing Areas |
| • | Industrial Warehouses. Pulp and Paper Mills |
| • | Chemical Plants. Fertilizer Plants |
| • | Fertilizer Plants Off-Shore Oil Platforms. Pipeline Barges |
Australian Urethane Systems Pty. Ltd. all rights reserved
 |
 |
 |
 |
 |
 |
 |
Polyaspartic
COATINGS
 |
 |